Moisture meters are handy tools for a wide range of purposes, from DIY projects to home inspections. They can check for mold growth and determine whether your basement or basement walls have water issues that may be causing problems.
Pin moisture meter: These devices have a number of small metal probes that are pushed into the material being tested. A current flows between these probes, allowing the meter to measure the level of moisture in the substance.
What is the use of a moisture meter?
Capacitance moisture meter: These devices have conductive plates or heads that are placed on the material being measured by grain moisture meter. A high-frequency signal travels through the device, and its readings can be read on a digital screen.
These types of meter are invasive, so they must be used carefully. They also require repeated usage across different areas of the material to provide an accurate reading.
A pinless moisture meter, on the other hand, does not need to be punctured to obtain a reading. Instead, it lays flat against the tested material and a high-frequency signal travels through it.
In the grain industry, moisture meters are a boon when they’re used intelligently and with trust. However, they can be a threat when used in the wrong way or without a close eye.
It is important to test the meter prior to taking any readings, as this will ensure the meter is working properly and provides accurate results. Some moisture meters have a built-in calibration block or kit, so it’s easy to calibrate them correctly for the material being tested.